Sax on the Web Forum banner
1 - 3 of 3 Posts

Distinguished SOTW Member
Joined
2,011 Posts
Discussion Starter · #1 ·
Hi all just wondering about thoughts on moving the neck strap hook on the horn in my previous post..has anyone done this and if so how far down...I have moved them on all the 10ms I have owned and do feel that this hook is a little to high as well ..it will leave a scare but I want to play this forever so I want it to be as comfortable as possible..
Peace
 

Distinguished SOTW Coffee Guru
Joined
43,582 Posts
if you plan to move it only down you don't need to have a new hook soldered or the old one replaced (which will leave TWO scars!)

this can be fabricated by a good tech or even a competent jeweler ( was realized on a 6M but you can use it on any horn) ( click a couple of times if you need to enlarge it, is a big picture)
Musical instrument Bicycle part Rim Automotive tire Household hardware
 

Distinguished SOTW Member
Joined
2,011 Posts
Discussion Starter · #3 ·
if you plan to move it only down you don't need to have a new hook soldered or the old one replaced (which will leave TWO scars!)

this can be fabricated by a good tech or even a competent jeweler ( was realized on a 6M but you can use it on any horn) ( click a couple of times if you need to enlarge it, is a big picture)
View attachment 265772
That's cool however I think it has to be moved to the side as well
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top