Sax on the Web Forum banner

Selmer Keyguard Screw Threads ...

3377 Views 6 Replies 5 Participants Last post by  clarnibass
What pitch is the thread on these screws? I need to get a tap and die that exact size.

It's a 3mm thread, but not as fine a thread as an M3x0.5.

And it's exactly the same as the threads on the pillars going through the sockets on Selmer clarinets with an articulated C#/G#.
1 - 1 of 7 Posts
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.