Sax on the Web Forum banner

Screws for "The Martin" keyguard.

1243 Views 3 Replies 4 Participants Last post by  Wind_Mill
The screws on the keygaurd on my "The Martin" saxes come loose. Anyone know what to do and how I can get new screws?
1 - 1 of 4 Posts
Nail polish should work or hang a little bit of dental floss in the cavity and put the screw in. Cut off the excess hanging out and to get it all off, use a match to burn the little bit hanging on. You will be able to unscrew easily when needed. A hardware store may have some screws in the little drawers marked "brass" but they will not be lacquered.
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.