Sax on the Web Forum banner
1 - 5 of 5 Posts

· Distinguished SOTW Member, Forum Contributor 2009-
Joined
·
2,758 Posts
If you put a straight edge on the table of your mouthpiece you will notice that at some point the mouthpiece begins to curve away from a straight line as you proceed towards the tip. When you blow on a mouthpiece you cause the reed to vibrate and the steeper the curve (the greater the tip opening) the more air that can be put into sound production before the tip of the reed contacts the tip of the mouthpiece. But obviously it will be harder to bend a stiff reed over a steeply curved facing; you have two choices. You can blow harder or you can use a more flexible reed. Try blowing on some different 'pieces with varied openings using the same reed and you will be able to feel the difference.
 

· Distinguished SOTW Member, Forum Contributor 2013
Joined
·
4,426 Posts
Not necessarily.

With a properly developed, mature embrochure and controlled, supporting airstream, any player should be able to play any set up. You will eventually though, through experimentation, find your ideal.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top