Sax on the Web Forum banner
1 - 3 of 3 Posts

·
Banned
Joined
·
6,369 Posts
Discussion Starter · #1 ·
Okay guys, I need help.

I'd like to salvage the ligature that came with my double line Link. The major problem with it is the band that wraps around the mouthpiece body is distended. I was thinking maybe I could de-solder the band, cut a few mm on each sides and re-solder it. Is it something I could do with a regular propane torch? Would I need some soldering flux? I've never soldered before so any help would be appreciated.

There are other problems with the lig but they'll be easier to fix. Here are some pics: https://picasaweb.google.com/112446046746578763647/LinkLig?authkey=Gv1sRgCIfhzvThk4evOw#slideshow/5624575918822835890.

Of course I could buy a FL and throw this one in the trash but I'd really love to make it usable again. Or should I just give up, shut up and practice instead? :twisted: :tsk:

Thanks in advance.
 

·
Banned
Joined
·
6,369 Posts
Discussion Starter · #3 ·
A packing plate between the pressure plate and the reed ?
If you want to keep using it, definately don't mess with it!!!

John.
Adding material between the pressure plate and the reed is something I have considered but I would really like to restore the ligature like my mouthpiece got restored. Another sax player gave me the mpc and lig together and it would mean something I could restore the original lig. I'm not sure what skill or expertise would be required to fix it but it is a project I would love to tackle if it's not unreasonable. Might be a waste of time though.
 

·
Banned
Joined
·
6,369 Posts
Discussion Starter · #5 ·
Great! Thank you for the help Stephen!

I indeed would like to keep it as close to original as possible.

A jeweler you said? Why didn't I think of it? That's a great suggestion!

While I have you, I'd like to ask you another question if you don't mind: would it be possible to drill into the rivet that holds the plate onto the screw in order to dismantle the whole ligature, clean the screw thread and straighten the plate and then re-attach it by replacing the rivet by a short screw (similar to how the Francois Louis ligature design)


Or would there be a less destructive way to do so?
 
1 - 3 of 3 Posts
Top