So my question has to do with the way the G# spatula key contact the RH trill key on a later Conn 10M (this example is 1950). The RH key has a bit of a nub on the part that makes contact with the spatula key. It would seem as though the spatula key would sit in front of this nub but the assembled key work tells a different story. In this example, the very end of the spatula key is sitting on top of this nub. Is this the intended way this assembly is suppose to work or do I have some keys out of line? I have a few pictures but they are hard to see! The picture with the two keys assembled shows how the keys sit in rest position (neither of the keys are engaged).